自吸泵的结构类型很多，其中熔盐
There are many types of self - priming pumps, including molten salts
泵、真空泵、液下泵、计量泵、齿轮泵、耐腐蚀泵、耐酸泵、消防泵向旋转方向流动。然后与右回水孔流来的水汇合，顺着蜗壳流动。由于液体在蜗壳内不断冲击叶栅，不断被叶轮击碎，就同空气强烈搅拌混合，生成气水混合物，并不断地流动致使气水不能分离。混合物在蜗壳出口被隔舌剥离，沿短管进入分离室。在分离室内空气被分离出来，由出口管排掉，而水仍经左右回水孔流向叶轮外缘，并与吸入管空气相混合。如此反复循环，逐渐将吸入管路中的空气排尽，使水进入泵内，完成自吸过程。排污泵自吸泵油泵隔膜泵螺杆泵齿轮油泵泵相同，其区别只是回水不流向叶轮外缘，而流向叶轮入口。内混式自吸泵在启动时，须打开叶轮前下方的回流阀，使泵内液体流回到叶轮入口。水在叶轮高速转动的作用下与吸入管来的空气相混合，形成气水混合物排至分离室。在这里空气排出而水又从回流阀返回到叶轮入口。如此反复进行，直至空气排尽，吸上水来内混式的自吸泵，工作原理与外混式自吸。
Pumps, vacuum pumps, liquid pumps, metering pumps, gear pumps, corrosion-resistant pumps, acid pumps and fire pumps flow in a rotating direction. Then it converge with the water coming from the right backwater and flow along the volute. Due to the continuous impact of the liquid in the spiral case, the impeller is constantly crushed by the impeller, it is stirred and mixed strongly with the air to produce a mixture of gas and water, and it is constantly flowing so that the gas and water can not be separated. The mixture is stripped off the tongue at the outlet of the volute and enters the separation chamber along the short tube. The air in the separation chamber is separated from the outlet pipe, and the water flows to the outer edge of the impeller through the left and right backwater holes, and is mixed with the air of the suction pipe. Such repeated circulation, gradually drained the air in the suction pipe, and made the water enter the pump to complete the self suction process. The difference between the self priming pump, the oil pump, the diaphragm pump, the screw pump and the gear pump is the same as that of the pump. The difference is that the backwater does not flow to the outer edge of the impeller and flows to the impeller inlet. When the internal mixing self priming pump is started, the reflux valve at the front and bottom of the impeller must be opened, so that the liquid in the pump will flow back to the impeller inlet. The water is mixed with the air from the suction pipe under the action of high speed rotation of the impeller, so that the mixture of air and water is discharged to the separation chamber. Here the air drained away and the water returned from the return valve to the impeller inlet. So repeatedly, until the air drained, suction water to the internal mixing self suction pump, the working principle and external mixing self suction.